Login // Register
User:
Pass:
  submit
  


20 Ton Used Pedersen Hydraulic Clicker Press Swing Head, Mdl. VILH 282M, Out Board Supports, Dual Palm Control, Stroke Counter, #A5015

Related Videos
70 TON USED SAMCO CLICKER PRESS (LARGE SLIDING TABLE) "EXCELLENT CONDITION", MDL. SERIES 70, SLIDING TABLE, COUNTER, HYDRAULIC TANK, #A5019
767  views
40 TON X 19" USED DAKE H-FRAME HYDRAULIC PRESS (LIKE NEW CONDITION), MDL. PSS40, ADJUSTABLE TABLE, HYDRAULIC UNIT, TONNAGE INDICATOR, VARIABLE RAM SPEED, FLAT RAM NOSE, DOUBLE ACTING HYDRAULIC CYLINDER, CHAINLINK SAFETY CURTAIN, #A4569
747  views
125 Ton Used H-Frame Hydraulic Press, Mdl. , Hydraulic Ram, Hydraulic Table Raise & Fall, All New Seals!, #A2900
1194  views
105 Ton Verson Open Back Gap Frame Heavy Duty Stamping Punch Press, Mdl. 7 1/2, Air Clutch and Brake, Dual Palm Control, Bed Cushion, 30" x 39" Bed, 35 Strokes Per Minute, 8" Stroke, BIjur Lubrication System,Variable Speed Drive #A4766
1815  views
500 Ton Used Bliss Straight Side Stamping Press (BIG HEAVY DUTY PUNCH PRESS), Mdl. HP2-500-84X48, Bliss Controls, Data Instruments SmartPAK Wintriss Press Automation Control, AutoSetPAC, Wintriss Load Analyzer, (2) Programmable Cam Outputs, DiPRO and DSI2
1868  views
60 Ton x 4" OBI Stamping Press, 3" Slide Adjustment, 21" x 32" Bolster Plate, Dual Palm Pedestal, Machine runs GREAT #A4768
1227  views
105 Ton Verson Open Back Gap Frame Heavy Duty Stamping Punch Press, Mdl. 7 1/2, Air Clutch and Brake, Dual Palm Control, Bed Cushion, 30" x 39" Bed, 35 Strokes Per Minute, 8" Stroke, A4767
1340  views
170 Ton x 17" Used Beckwood C-Frame (Down Acting) Hydraulic Press, Mdl. CF170F110P1618, 16" x 22" Bed, Allen Bradley PLC Controls with a Mitsubishi E600 Operator Interface, Hydraulic System, NOTE: NEW REPLACEMENT COST OVER $150,000, #A3877
1719  views
170 Ton x 17 "Usado Beckwood C-Frame (Down Acting) Prensa Hidráulica, Mdl. CF170F110P1618, 16" x 22 "Cama, Allen Bradley PLC Controla con una Interfaz Mitsubishi E600, Sistema Hidráulico NOTA: NUEVO COSTO DE REEMPLAZO DE $ 150,000, # A3877
1076  views
60 Ton x 4" Used Rousselle Straight Side Double Crank Press, Mdl. 6SS-72, Dual Palm Control with E-Stop, Air Clutch & Brake, Air Counter Balance, Foot Pedal, Manual Ram Adjustment, #A4035
2434  views
60 Ton x 4 "Usado Revestimiento de doble acanaladura de doble cara Roselle, Mdl. 6SS-72, Control de doble palanca con parada de emergencia, Embrague de aire y freno, Balance de contrapeso, Pedal, Ajuste manual de espolón, # A4035
1209  views
25 Ton usado Herman Schwabe Traveling Head Clicker Press, Modelo. NPO160X65, Accesorio de Alimentación de Rollo Accionado, Pedal, Movimiento de Cabeza Accionado, # A4382
1265  views
22 Ton x 2-1 / 2 "Usado Bliss OBI Punch Press, Mdl. 19-1 / 2, Air Trip Embrague Mecánico, Doble Botón de Palanca, Pedal, # A4326
1256  views
22 Ton x 2-1/2" Used Bliss OBI Punch Press, Mdl. 19-1/2, Air Trip Mechanical Clutch, Dual Palm Button Control, Foot Pedal, #A4326
1603  views
750 Ton x 18 "del Pacífico hidráulico Pressformer Press, control dual de Palm, barreras de seguridad # A4336
1902  views
750 Ton x 18" Pacific Hydraulic Pressformer Press, Dual Palm Control, Safety Light Curtains #A4336
2131  views
200 Ton x 12" Used Pacific "Press Former" Hydraulic C Frame Universal Press, Mdl. 200PF Pressformer, Foot Pedal, NOTE: NEW REPLACEMENT COST $140,000, #A2309
1929  views
200吨×12“用于太平洋”按前“液压C画幅通用出版社,MDL200pF的Pressformer,脚踏板,注意:新更换的花费$140,000#A2309
1959  views
15吨×2“使用Benchmaster OBI冲床(晚建模像新的一样!),MDL。251A-2,双棕榈按钮,紧急停止,空气摩擦离合器和空气制动,自动润滑系统,数字化行程计,年(2006年)#A3905
1851  views
15 Ton x 2 "Usado Benchmaster OBI Prensa troqueladora (LATE MODELO COMO NUEVO!), MDL. 251A-2, doble palma botones, parada de emergencia, Aire embrague y frenos de aire, sistema de lubricación automática, contador de golpes Digital, Año (2006) # A3905
2007  views
15 Ton x 2" Used Benchmaster OBI Punch Press (LATE MODEL- LIKE NEW!), Mdl. 251A-2, Dual Palm Buttons, Emergency Stop, Air Clutch & Air Brake, Auto Lube System, Digital Stroke Counter, Year (2006) #A3905
2363  views
4 Ton x 1-1/4" Used Kenco OBI Deep Throat Punch Press, Mdl. #4A, Foot Pedal, Stand, Casters, Stroke Counter, #A3914
2716  views
5 Ton x 1-1/4" Used Di-Acro OBI Deep Throat Power Punch Press, Mdl. #5, Foot Pedal, Stand, #A3913
3009  views
2 Ton Used Spartanics Automatic Registration Punch Press, Mdl. M83, Foot Pedel, Air Clutch, Vacuum Switch, Can Be Used For The Following Applications: Clock Faces, Circular Dial, Calculator Centers, Panel Pilot Holes, Nameplate Mounting Holes, Artwork Reg
2093  views
Featured Videos

20\" x 44\" Used Voo...


How to Buy a Bridgep...

To add this video to your favorite list please login first.
Category: Press Videos
Views: 916 times
Description:
  Populate this video to other places!
 
  (URL)
  (Embed this code in your desired page)
Tags:

Press, Punch press, Presses, OBI Punch, Hydraulic Press, Turret Punch, Sterling Machinery, Dealer, Used, New, Metal Working
Machines, Machine Tools, dealers, fabrication, sell, sale, metalworking, buy, new, used
Similar Machine Tools For Sale : 
O.B.I. Flywheel Type Single Crank :
Hydraulic :
O.B.I. Back Geared Single Crank :
Straight Side (Double Crank) :
High Speed Production :
Air :
Gap Frame, Single Crank & Double Crank :
Laminating :
Straight Side (Single Crank) :
Horn :

60 Ton x 3 1/2" Used Bliss OBI Punch Press, Mdl. 21 1/2, Motorizied Ram adjustment, Air Clutch & Air Brake, Dual Air Ram Counterbalances, Bijur Automatic Lubrication System, Air Regulators & Filters, Belts & Flywheel Guards, Direct AC Motor Driven, Palm Controls, A/C With Reserve Tank, #1410 *SPECIAL PRICE! ASK SALESPERSON ABOUT MACHINE AND WARRANTY*

Stock No: 1410
Manufacturer: Bliss
Capacity: 60 Ton x 3 1/2"
Category: Presses
Subcategory: O.B.I. Back Geared Single Crank
Condition: Used

5 Ton x 02" Used Unipunch Air Over Hydraulic Deep Throat Press, Mdl. 1012-UP, Foot Operated, Air Controls, Regulators, Valves, Cabinet Mounted W/Drawer, Steel Fabricated Construction, Note: Machine Can Be Used For Gauging, #1771

Stock No: 1771
Manufacturer: Unipunch
Capacity: 5 Ton x 2"
Category: Presses
Subcategory: Hydraulic
Condition: Used

150 Ton x 4" Used Heim Straight Side Double Crank Air Clutch, Mdl. S-150, Power Ram Adjustment With Indicator, Magnetic Starter, Automatic Lubrication, Operator Station With Palm Buttons: Inch, Single, Continous, Start, Stop, Air Clutch & Brake, Bolster Plates, (2) Air Counter Balances, Air Gauges, Hoses and Filters, #3546 *SPECIAL PRICE! ASK SALESPERSON ABOUT MACHINE AND WARRANTY*

Stock No: 3546
Manufacturer: Heim
Capacity: 150 Ton x 4"
Category: Presses
Subcategory: Straight Side (Double Crank)
Condition: Used

100 Tons x 6" Used Kard Upacting 4 Post Hydra/Pneumatic Spotting Press, Mdl. , Hand Pump With Handles, Hydra Cylinder & Oil Reservoir, Pneumatic System With Regulator, Filters, Hoses & Connectors, Grease Fittings, #3802 *SPECIAL PRICE! ASK SALESPERSON ABOUT MACHINE AND WARRANTY*

Stock No: 3802
Manufacturer: Kard
Capacity: 100 Tons x 6"
Category: Presses
Subcategory: Air
Condition: Used

20 Ton x 2" Used Benchmaster High Speed Press, Mdl. 20-4-2424-2-14-PP 20/300-787F, Reeves Variable Speed Drive, Hydraulic Overlaod Protection, Palm Button Controls W/Emergency Stop, Auto Lube System, Pedestal Mounted Controls, 4 Vibratory Mtg. Pads, Air Valves & Gauges, Horsepower: 3, Electrics: 230/460 VLT 3PH, #4210

Stock No: 4210
Manufacturer: Benchmaster
Capacity: 20 Ton x 2"
Category: Presses
Subcategory: High Speed Production
Condition: Used

150 Ton x 4" Used Heim Straight Side Punch Press, Mdl. S150, 42" x 60" T-Slotted Plate, Inch-Single-Continous Setting, Dual Palm Station, Air Clutch & Brake, Motorizied Ram Adjustment, Dual Counter Balance, Surge Tank, Auto Lube, Top Stop, Horsepower: 15, #5915 *SPECIAL PRICE! ASK SALESPERSON ABOUT MACHINE AND WARRANTY*

Stock No: 5915
Manufacturer: Heim
Capacity: 150 Ton x 4"
Category: Presses
Subcategory: Straight Side (Double Crank)
Condition: Used

175 Ton x 6" Used Heim Straight Side Press, Mdl. 175-42-78, Bijur Automatic Lubrication System, Dual Air Counter Balance, Ram Indicator With Power Slide Adjustment, (4) Mounting Pads, Front Operated Palm Button Controls, Emergency & Top Stop, Keyed Lock Out Control Modes, Main Breaker Panel, Air Filters & Regulato, #6120 *SPECIAL PRICE! ASK SALESPERSON ABOUT MACHINE AND WARRANTY*

Stock No: 6120
Manufacturer: Heim
Capacity: 175 Ton x 6"
Category: Presses
Subcategory: Straight Side (Double Crank)
Condition: Used

75 Ton x 16" Used Williams & White Hydraulic Press, Mdl. 75, Foot Pedal, Tonnage Gauge, Horsepower: 10, #6153

Stock No: 6153
Manufacturer: Williams & White
Capacity: 75 Ton x 16"
Category: Presses
Subcategory: Hydraulic
Condition: Used

30 Ton x 18" Used Logan Hydraulic Press, Mdl. 6000 D-10, Tonnage Indicator, Foot Treadle, #6222 *SPECIAL PRICE! ASK SALESPERSON ABOUT MACHINE AND WARRANTY*

Stock No: 6222
Manufacturer: Logan
Capacity: 30 Ton x 18"
Category: Presses
Subcategory: Hydraulic
Condition: Used

75 Ton x 8" Used Niagara O.B.I. Punch Press, Mdl. E-75, Dual Palm Controls, Power Ram Adjustment, Air Counter Balance, Auto Lube System, Air Clutch & Brake, #6332

Stock No: 6332
Manufacturer: Niagara
Capacity: 75 Ton x 8"
Category: Presses
Subcategory: O.B.I. Flywheel Type Single Crank
Condition: Used

45 Ton x 4" Used Niagara O.B.I. Punch Press, Mdl. A3-1/2, Air Clutch & Brake, Air Counter Balance, Auto Lube, Surge Tank, Foot Pedal, Incline Screw, #6338 *SPECIAL PRICE! ASK SALESPERSON ABOUT MACHINE AND WARRANTY*

Stock No: 6338
Manufacturer: Niagara
Capacity: 45 Ton x 4"
Category: Presses
Subcategory: O.B.I. Flywheel Type Single Crank
Condition: Used

100 Ton x 5" Used Alpha Punch Press (4 Post) Cut Off Press, Mdl. F, Motorizied Ram Adjustment, Inch/Single/Continuos Mode, Air Clutch, Dual Palm Control, Top Stop, Emergency Stop, Horsepower: 15, #6640 *SPECIAL PRICE! ASK SALESPERSON ABOUT MACHINE AND WARRANTY*

Stock No: 6640
Manufacturer: Alpha Machine Tools
Capacity: 100 Ton x 5"
Category: Presses
Subcategory: High Speed Production
Condition: Used

50 Ton x 18" Used Hannifin Hydraulic Press, Mdl. 500-41, Tonnage Gauge, #6649

Stock No: 6649
Manufacturer: Hannifin
Capacity: 50 Ton x 18"
Category: Presses
Subcategory: Hydraulic
Condition: Used

8 Ton x 12" Used Hannifin Hydraulic Press, Mdl. OGF8B-8-2-2-PB6, Dual Palm Control, Air Oil Cooler, Pressure Gauge, Oil Filter, #7016

Stock No: 7016
Manufacturer: Hannifin
Capacity: 8 Ton x 12"
Category: Presses
Subcategory: Hydraulic
Condition: Used

32 Ton x 4" Used Minster OBI Press, Mdl. #4, Air Clutch & Brake, 24" x 15" x 2 1/2" Bolster Plate, Dual Palm Control, Foot Pedal, Auto Lube, Top Stop, Emergency Stop, Foot Pads, Surge Tank, #7104

Stock No: 7104
Manufacturer: Minster
Capacity: 32 Ton x 4"
Category: Presses
Subcategory: O.B.I. Flywheel Type Single Crank
Condition: Used

7 Ton x 1" Used Kenco Obi Punch Press, Mdl. 7 1/2, Hand Control Lever, #7192

Stock No: 7192
Manufacturer: KENCO
Capacity: 7 Ton x 1"
Category: Presses
Subcategory: O.B.I. Flywheel Type Single Crank
Condition: Used

20 Ton x 2" Used Perkins OBI Press, Mdl. 351-B, Air Trip Mechanical Clutch, Littel Model 50045 Dial Feeder, 3" Wide x 0"-8" Stroke, Dual Palm Control Station, Guarding, #7325

Stock No: 7325
Manufacturer: PERKINS
Capacity: 20 Ton x 2"
Category: Presses
Subcategory: O.B.I. Back Geared Single Crank
Condition: Used

25 Ton x 2" Used V & O High Speed OBI Press, Mdl. 25ST, Air Clutch & Brake, 6" Mechanical Feeder, Outboard Support#7426

Stock No: 7426
Manufacturer: V & O
Capacity: 25 Ton x 2"
Category: Presses
Subcategory: High Speed Production
Condition: Used

25 Ton x 6" Used Dake Nortamatic HYD Press, Mdl. 51-150, Dake 15" x 0.002" - 0.125" Feeder, 0.010" - 8" Index, Manual Lever Control, Adjustable Top Stop Control, Pressure Control, Oil Cooler, #7427 *SPECIAL PRICE! ASK SALESPERSON ABOUT MACHINE AND WARRANTY*

Stock No: 7427
Manufacturer: DAKE
Capacity: 25 Ton x 6'
Category: Presses
Subcategory: Hydraulic
Condition: Used

45 Ton x 1" Used L & J OBI High Speed Press, Mdl. #45HS, Wintriss Solid State Digital Control w/ Load Analyzer, Peterson Model 104HS Mechanical Roll Feeder (12"), H.P. 5, Air Clutch & Brake, Shadow V Light Curtain, Auto Lube System, Dual Palm Control #7765 *SOLD AS IS, NO WARRANTY. MACHINE NEEDS WORK*

Stock No: 7765
Manufacturer: L & J
Capacity: 45 Ton x 1"
Category: Presses
Subcategory: High Speed Production
Condition: Used

25 Ton x 3" Used Rousselle Gap Frame OBI Punch Press (Single Crank), Mdl. #3G, Air Trip Mechanical Clutch, Electric Foot Pedal, H.P. 3, #7809

Stock No: 7809
Manufacturer: Rousselle
Capacity: 25 Ton x 3"
Category: Presses
Subcategory: Gap Frame, (Single Crank)
Condition: Used

20 Ton x 14" Used Hannifin Hydraulic Press, Mdl. F101, Dual Hand Control, Pressure Gauge, #7878

Stock No: 7878
Manufacturer: Hannifin
Capacity: 20 Ton x 14"
Category: Presses
Subcategory: Hydraulic
Condition: Used

25 Ton x 2.9" Used Hidaka OBS Punch Press, Mdl. Mark 25, One Shot Lube System, Stroke Speed Indicator, Stroke Position Indicator, Remote Dual Palm Control Stand, Dual Counter Balance, Hydraulic Overload Protection, Shadow IV Light Curtain, Data Instrument Brake Monitor, #8142 *SPECIAL PRICE! ASK SALESPERSON ABOUT MACHINE AND WARRANTY*

Stock No: 8142
Manufacturer: Hidaka
Capacity: 25 Ton x 2.9"
Category: Presses
Subcategory: O.B.I. Flywheel Type Single Crank
Condition: Used

80 Ton x 10" Used Federal OBI Press, Mdl. #7, Wintress Dipro 1500 Die Monitor, Air Clutch & Brake, Air Counter Balance, Auto Lube System, Dual Palm Control, Cycled and Guaranteed #8149

Stock No: 8149
Manufacturer: Federal
Capacity: 80 Ton x 10"
Category: Presses
Subcategory: O.B.I. Flywheel Type Single Crank
Condition: Used

100 Ton x 5" Used Minster Straight Side Single Crank Press With Cushion, Mdl. S1-100-24-30, Air Clutch & Brake, Die Cushion, Tie - Rod Construction, Triad Light Curtains, Imco Controls, Farval One Shot Lube System, Dual Air Counter Balance, Power Ram Adjustment, Dual Palm Control On Machine, Electric Foot Pedal, 10 HP, #8745

Stock No: 8745
Manufacturer: Minster
Capacity: 100 Ton x 5"
Category: Presses
Subcategory: Straight Side (Single Crank)
Condition: Used

20 Ton x 2" V & O Horn Press, Mdl. 41N, 15" x 10" Bed #8877

Stock No: 8877
Manufacturer: V & O
Capacity: 20 Ton x 2"
Category: Presses
Subcategory: Horn
Condition: Used

50 Ton x 15" Used Denison Multipress Hydraulic Press, Mdl. FN 50, Hand Lever Control, #9108

Stock No: 9108
Manufacturer: Denison
Capacity: 50 Ton x 15"
Category: Presses
Subcategory: Hydraulic
Condition: Used

12 Ton X 12" Used Denison Multipress Hydraulic Press, Mdl. M5P12, #9121

Stock No: 9121
Manufacturer: Denison
Capacity: 12 Ton x 12"
Category: Presses
Subcategory: Hydraulic
Condition: Used

12 Ton x 12" Used Denison Multipress Hydraulic Press, Mdl. M5P12, () #9123

Stock No: 9123
Manufacturer: Denison
Capacity: 12 Ton x 12"
Category: Presses
Subcategory: Hydraulic
Condition: Used

10 Ton x 10" Used Hannifin Hydraulic Press, Mdl. F-101-11, Hand Lever Control, Floor Model, #9124

Stock No: 9124
Manufacturer: Hannifin
Capacity: 10 Ton x 10"
Category: Presses
Subcategory: Hydraulic
Condition: Used

50 Ton Used Airam Cut Off Press With Large Bed, Mdl. 3562, Note: New Replacement Cost $ 61,000, Dual Palm Control, Air Tank, #9175

Stock No: 9175
Manufacturer: Airam
Capacity: 50 Ton
Category: Presses
Subcategory: Air
Condition: Used

8' x 4' Used Black Brothers Power Lamination Press, Mdl. 121, Chain Power Driven, Pedestal Control, Horsepower: 5, New Replacement Cost $60,000, #9178

Stock No: 9178
Manufacturer: BLACK BROTHERS
Capacity: 8' x 4'
Category: Woodworking Machines, Presses
Subcategory: Laminating, Heated Platen
Condition: Used

60 Ton x 4" Used Rousselle Gap Frame OBI Press (Single Crank), Mdl. 6B-60, Air Clutch & Brake, ISB Light Curtains, Dual Air Counter Balance, Remote Dual Palm Control Stand, Electric Foot Pedal, Manual Ram Adjustment, Horsepower: 5, #9470

Stock No: 9470
Manufacturer: Rousselle
Capacity: 60 Ton x 4"
Category: Presses
Subcategory: Gap Frame, (Single Crank)
Condition: Used

20 Ton x 1-1/4" Used Minster High Speed Punch Press, Mdl. P2-20-24, Air Clutch & Brake, Vamco Feeder, Dual Air Counter Balance, Auto Lube System, 3,092 Hours, 24" x 19" Bed, 250-600 SPM #A1252

Stock No: A1252
Manufacturer: Minster
Capacity: 20 Ton x 1-1/4"
Category: Presses
Subcategory: High Speed Production
Condition: Used

60 Ton x 20" Used Greenerd Hydraulic Arbor Press, Mdl. H-60 AD 21, Foot Pedal, Pressure Gauge #A1384

Stock No: A1384
Manufacturer: Greenerd
Capacity: 60 Ton x 20"
Category: Presses
Subcategory: Hydraulic
Condition: Used

175 Ton Used Columbus Industries Model Trimmer 4 Post Hydraulic Trim Press, Mdl. Trimmer, 4 Way Can Trimming Attachment, Dual Palm Controls on Front and Rear Of Machine, Vickers Model# CHJ0 13031 Hydraulic Pump, NOTE: Pump Does Not Have To Sit On Top Of The Machine, It Can Go On The Floor, #A1879

Stock No: A1879
Manufacturer: Columbus Industries
Capacity: 175 Ton
Category: Presses
Subcategory: Hydraulic, Trim Press
Condition: Used

60 Tons x 3" Used Bliss Air Clutch High Production Straight Side Double Crank Punch Press, Mdl. 660d HP38525, 47" x 18-1/2" Bed, Air Clutch & Brake, #A1939

Stock No: A1939
Manufacturer: Bliss
Capacity: 60 Tons x 3"
Category: Presses
Subcategory: Straight Side (Double Crank)
Condition: Used

35 Ton x 3" Bliss, Mdl. C-35, Air Clutch & Brake, Bliss Cushion, Dual Palm Control #A1941

Stock No: A1941
Manufacturer: Bliss
Capacity: 35 Ton x 3"
Category: Presses
Subcategory: O.B.I. Flywheel Type Single Crank
Condition: Used

45 Tons x 4" Used Bliss Air Trip Mechanical OBI Punch Press, Mdl. 21-1/2, Air Trip Mechancial Clutch, Dual Palm Buttons, Parts Counter #A1943

Stock No: A1943
Manufacturer: Bliss
Capacity: 45 Tons x 04"
Category: Presses
Subcategory: O.B.I. Flywheel Type Single Crank
Condition: Used

20 Ton x 2" Used Perkins Air Clutch OBI Press, Mdl. 351-B, Air Clutch & Brake, Littel Model 50045 Dial Feeder, 3, Dual Palm Control Station, US Motors Variable Speed Drive, Feeder, Year (1985) #A1954

Stock No: A1954
Manufacturer: PERKINS
Capacity: 20 Ton x 2"
Category: Presses
Subcategory: O.B.I. Back Geared Single Crank
Condition: Used

10 Ton x 1" Used Perkins Air Clutch Punch Press With Variable Speed Drive, Mdl. 2A, Reeves Variable Speed Drive, Stand, Electric Foot Pedal, Air Clutch And Brake, #A1956

Stock No: A1956
Manufacturer: PERKINS
Capacity: 10 Ton x 1"
Category: Presses
Subcategory: O.B.I. Flywheel Type Single Crank
Condition: Used

10 Ton x 1" Used Perkins Mechanical OBI Punch Press, Mdl. 2A, Stand, Bijur One Shot Lubrication System, Rapid 1-1/2" Air Feed Mdl. A2, Hand Control Lever, #A1957

Stock No: A1957
Manufacturer: PERKINS
Capacity: 10 Ton x 1"
Category: Presses
Subcategory: O.B.I. Flywheel Type Single Crank
Condition: Used

150 Tons x 10" Used Chicago Straight Side Double Crank Punch Press, Mdl. , Air Clutch & Brake, Dual Palm Control, #A1968 *SPECIAL PRICE! ASK SALESPERSON ABOUT MACHINE AND WARRANTY*

Stock No: A1968
Manufacturer: Chicago
Capacity: 150 Tons x 10"
Category: Presses
Subcategory: Straight Side (Double Crank)
Condition: Used

3 Ton x 15" Used Hannifin C-Frame Hydraulic Press, Mdl. OG-F3B-3-2-1-M, Dual Hand Lever Control, PSI Gauge, 40 Gallon Tank, #A2119

Stock No: A2119
Manufacturer: Hannifin
Capacity: 3 Ton x 15"
Category: Presses
Subcategory: Hydraulic
Condition: Used

32 Ton x 4" Used Minster OBI Punch Press, Mdl. #4, Air Clutch & Brake, 24" x 15" x 2 1/2" Bolster Plate, Dual Palm Control, Foot Pedal, Auto Lube, Top Stop, Emergency Stop, Foot Pads, Surge Tank, #A2254

Stock No: A2254
Manufacturer: Minster
Capacity: 32 Ton x 4"
Category: Presses
Subcategory: O.B.I. Flywheel Type Single Crank
Condition: Used

4 Ton Used Denison Multi-Press Hydraulic C Frame Press, 18" x 11" Bed, Dual Electric Finger Button Operation, PSI Gauge, #A2257

Stock No: A2257
Manufacturer: Denison
Capacity: 4 Ton
Category: Presses
Subcategory: Hydraulic
Condition: Used

25 Ton Used Denison Hydraulic C Frame Press, Mdl. KA25C92D24 JIC, Dual Palm Controls, #A2265

Stock No: A2265
Manufacturer: Denison
Capacity: 25 Ton
Category: Presses
Subcategory: Hydraulic
Condition: Used

4 Ton x 1" Used Kenco Punch Press, Mdl. #4, Electrical Magnetic Solenoid Dual Finger Push Button Control, Stand, #A2392

Stock No: A2392
Manufacturer: KENCO
Capacity: 4 Ton x 1"
Category: Presses
Subcategory: O.B.I. Flywheel Type Single Crank
Condition: Used

75 Ton Used Samco Full Beam Die Cutting Clicker Press Machine For Use With Feeder. (Production Type Machine), Mdl. TC-75, New Electrics, #A2423

Stock No: A2423
Manufacturer: Samco
Capacity: 75 Ton
Category: Presses
Subcategory: Clicker
Condition: Used

60 Ton x 5" Used Bliss Air Clutch Open Back Double Crank Inclinable Punch Press, Mdl. 106FW, Dual Palm Control, Eaton Dynamatic Variable Speed Control, Strokes Per Minute Indicator, Air Clutch & Brake, Ross Air Valve, 2- Support Air Tanks, Dual Counter Balance, Electric Safety Door Latch, Emergency Stop, Vibration Pads, #A2459

Stock No: A2459
Manufacturer: Bliss
Capacity: 60 Ton x 5"
Category: Presses
Subcategory: O.B.I. Back Geared Single Crank, Straight Side (Double Crank), Gap Frame, (Double Crank)
Condition: Used

22 Ton Used Minster High Speed Punch Press, Mdl. B1-22, Air Clutch & Brake, Peterson Roll Feed, Durant Batch Counter, Emergency Stop, Top Stop, Auto Lube System, SPM Counter, Load Meter, Independent Control Stand, #A2495

Stock No: A2495
Manufacturer: Minster
Capacity: 22 Ton
Category: Presses
Subcategory: High Speed Production
Condition: Used

22 Ton Used Minster High Speed Punch Press, Mdl. B1-22, 20" x 12" Bed, 0-850 SPM, Air Clutch & Brake, Vamco Feeder V-667 Mark 3 With Auto Lube, Durant Batch Counter, Emergency Stop, Top Stop, Auto Lube System, SPM Counter, Load Meter, Independent Control Stand, #A2497

Stock No: A2497
Manufacturer: Minster
Capacity: 22 Ton
Category: Presses
Subcategory: High Speed Production
Condition: Used

22 Ton x 2" Used Minster High Speed OBI Punch Press, Mdl. #3, 350 SPM, 20" x 12" Bed Size, Minute Meter, Parts Counter, Air Clutch & Brake, Ross Air Valve, #A2498

Stock No: A2498
Manufacturer: Minster
Capacity: 22 Ton x 2"
Category: Presses
Subcategory: High Speed Production
Condition: Used

15 Tons Used Perkins High Speed Punch Press, Mdl. 15-S, Air Clutch & Brake, Batch Counter, Emergency Stop, Top Stop, Auto Lube System, SPM Counter, Load Meter, Independent Control Stand, Vari Speed Drive, Minute Meter, Banner Variable Speed Control - Feeder Not Included!, #A2499

Stock No: A2499
Manufacturer: PERKINS
Capacity: 15 Tons
Category: Presses
Subcategory: High Speed Production
Condition: Used

22 Ton x 1" Used Federal High Speed Punch Press, Mdl. 22, 35 - 600 SPM, 20" x 12" Bed, Air Clutch & Brake, Parts Counter, Ross Air Valve, Independent Control Stand, SPM Counter, Oil Pressure Gauge, Auto Lube System, Peterson Roll Feed Mdl. DDR32XH, Emergency Stop, #A2500

Stock No: A2500
Manufacturer: Federal
Capacity: 22 Ton x 1"
Category: Presses
Subcategory: High Speed Production
Condition: Used

7.5 Tons Advanced Hydraulics C-Frame Press, Mdl. CPB7.5, T-Slotted Bolster Plate, Dual Palm Control, Limit Switch Control, Regeneration Circuit, Tonnage Gauge, 6, #A2531

Stock No: A2531
Manufacturer: Advanced Hydraulics
Capacity: 7.5 Tons
Category: Presses
Subcategory: Hydraulic
Condition: Used

32 Ton x 4" Used Bliss O.B.I. Punch Press, Mdl. , Rockford Safety Controls, Foot Pedal, Air Trip Mechanical Clutch, #A2478

Stock No: A2478
Manufacturer: Bliss
Capacity: 32 Ton x 4"
Category: Presses
Subcategory: O.B.I. Back Geared Single Crank
Condition: Used

60 Ton x 6" Used Savage 4 Post Hydraulic Blanking Trim Press, Mdl. 60HTP, STI Minisafe Light Curtains, Allen Bradley PLC, Replacement Cost Over $80,000, Year (1992) #A2756

Stock No: A2756
Manufacturer: Savage
Capacity: 60 Ton x 6"
Category: Presses
Subcategory: Hydraulic
Condition: Used

300 Ton x 4" Used Rousselle Heavy Duty Gap Frame Double Crank Inclinable Press, Mdl. B2-300-60-30, Double Geared Twin Drive, Quill Mounted Flywheel, Air Clutch and Disc Brake, (2) Air Counterbalances, Reinforced Box Type Bed, Slide and Crown, Power Slide Adjustment, Slide Adjustment Indicator, Automatic Lubrication, Dual Valve, Rotary Cam Limit Switch, Key Lock Selector Switches, Flywheel Cover, Two-Hand Controls for Inch, Single Stroke, Continuous, Stop on Top and Stop Button, Non-Fused Disconnect Switch, Air Pressure Switches for Air Clutch and Air Counterbalances, Timer Switch for Continuous Operation, Six Point Gibbing with Non-Metallic Liners, Brake Monitor, Dual Palm Control, Year (1977) #A3359

Stock No: A3359
Manufacturer: Rousselle
Capacity: 300 Ton x 4"
Category: Presses
Subcategory: Straight Side (Double Crank), Gap Frame, (Double Crank)
Condition: Used

35 Ton x 15" Used Denison Hydraulic MultiPress, Mdl. SPLA35C, Safety Guards, C94 Automatic Valve, Dual Finger Control, #A3563

Stock No: A3563
Manufacturer: Denison
Capacity: 35 Ton x 15"
Category: Presses
Subcategory: Hydraulic
Condition: Used

250 Ton x 18" Used Beckwood Hydraulic 4 Post Press, Mdl. 4P250F150P4042, 40" x 42" Bed Area, Dual Pedestal Mounted Controls, S.T.I Front & Back Light Curtains, Cooling Fan, New Replacement Cost $220,000, #A3746

Stock No: A3746
Manufacturer: Beckwood
Capacity: 250 Ton x 18"
Category: Presses
Subcategory: Hydraulic
Condition: Used

250 Ton Used Best Press Hydraulic Powder Compacting Press (Up And Down Acting), Mdl. JC-148, Note: 2,853 Hours on Meter, Drawings & Schematics Included, Recently Reconditioned. New Seals and Paint!, Vac-u-Max Powder Loader, Year (2000) #A3846

Stock No: A3846
Manufacturer: Best Press
Capacity: 250 Ton
Category: Presses
Subcategory: Powder Compacting & Metal Compaction
Condition: Used

170 Ton x 17" Used Beckwood C-Frame (Down Acting) Hydraulic Press, Mdl. CF170F110P1618, 16" x 22" Bed, Allen Bradley PLC Controls with a Mitsubishi E600 Operator Interface, Hydraulic System, NOTE: NEW REPLACEMENT COST OVER $150,000, #A3877

Stock No: A3877
Manufacturer: Beckwood
Capacity: 170 Ton x 17"
Category: Presses
Subcategory: Hydraulic
Condition: Used

100 Ton x 9" Used Niagara Straight Side Double Crank Press, Mdl. 67, Dual Palm Control, Electric Foot Pedal, #A3904

Stock No: A3904
Manufacturer: Niagara
Capacity: 100 Ton x 9"
Category: Presses
Subcategory: Straight Side (Double Crank)
Condition: Used

4 Ton x 1-1/4" Used Kenco OBI Deep Throat Punch Press, Mdl. #4A, Foot Pedal, Stand, Casters, Stroke Counter, #A3914

Stock No: A3914
Manufacturer: KENCO
Capacity: 4 Ton x 1-1/4"
Category: Presses
Subcategory: O.B.I. Flywheel Type Single Crank, Gap Frame, (Single Crank)
Condition: Used

7.5 Ton Used Benchmaster OBI Punch Press, Mdl. , #A3915

Stock No: A3915
Manufacturer:
Capacity: 7.5 Ton
Category: Presses
Subcategory: O.B.I. Flywheel Type Single Crank
Condition: Used

Used Custom 4 Post Heated Laminating Press, Mdl. , Control with Indicators, Timer, Heated Platen Switch, Air Regulators & Gauges, Temperature Gauge, Note: This machine was previously used to manufacturer the Lens for Stop lights. It still has dies that come with it., #A4003

Stock No: A4003
Manufacturer: Custom Made
Capacity:
Category: Presses
Subcategory: Laminating, Heated Platen
Condition: Used

25 Ton x 3" Used Rousselle OBI Deep Throat Punch Press (Single Crank), Mdl. 3F, Air Trip Mechanical Clutch, Dual Palm Control, Foot Pedal, Stroke Counter, #A4027

Stock No: A4027
Manufacturer: Rousselle
Capacity: 25 Ton x 3"
Category: Presses
Subcategory: O.B.I. Flywheel Type Single Crank
Condition: Used

40 Ton x 4" Used Rousselle Straight Side Single Crank Press, Mdl. 4SS56, Air Clutch & Brake, Air Counter Balance, Dual Palm Control, Foot Pedal, Manual Ram Adjustment, #A4029

Stock No: A4029
Manufacturer: Rousselle
Capacity: 40 Ton x 4"
Category: Presses
Subcategory: Straight Side (Single Crank)
Condition: Used

5 Ton Used Roper Whitney Kick Punch Press, Mdl. 58, Punch & Die, Stand, #A4037

Stock No: A4037
Manufacturer: Roper-Whitney
Capacity: 5 Ton
Category: Presses
Subcategory: Kick
Condition: Used

8 Ton x 1-1/2" Used Kenco OBI Punch Press, Mdl. 8-1/2, Mechanical Clutch, On/Off Switch, Stand, #A4222

Stock No: A4222
Manufacturer: KENCO
Capacity: 8 Ton x 1-1/2"
Category: Presses
Subcategory: O.B.I. Flywheel Type Single Crank
Condition: Used

7-1/2 Ton x 1-1/2" Used Kenco OBI Punch Press, Mdl. 7-1/2, Magnetic Start/Stop Push Button, Stand, Mechanical Clutch, #A4224

Stock No: A4224
Manufacturer: KENCO
Capacity: 7-1/2 Ton x 1-1/2"
Category: Presses
Subcategory: O.B.I. Flywheel Type Single Crank
Condition: Used

7-1/2 Ton x 1-1/2" Used Kenco OBI Punch Press, Mdl. 7-1/2, Foot Pedal, Stand, Disconnect Switch, Mechancial Clutch, #A4231

Stock No: A4231
Manufacturer: KENCO
Capacity: 7-1/2 Ton x 1-1/2"
Category: Presses
Subcategory: O.B.I. Flywheel Type Single Crank
Condition: Used

4 Ton x 1'' Used Benchmaster Mechanical OBI Punch Press Machine, Mdl. 451, Stand, Mechanical Clutch, Start/Stop Push Buttons, #A4234

Stock No: A4234
Manufacturer: Benchmaster
Capacity: 4 Ton x 1''
Category: Presses
Subcategory: O.B.I. Flywheel Type Single Crank
Condition: Used

8 Ton x 1-1/2" Kenco OBI Punch Press, Mdl. 8, Magnetic Start/Stop Push Button, Mechanical Clutch, Disconnect Switch, Stand, #A4250

Stock No: A4250
Manufacturer: KENCO
Capacity: 8 Ton x 1-1/2"
Category: Presses
Subcategory: O.B.I. Flywheel Type Single Crank
Condition: Used

4 Ton x 1" Used Kenco Punch Press, Mdl. 4, Stand, On/Off Switch, Mechanical Clutch, #A4251

Stock No: A4251
Manufacturer: KENCO
Capacity: 4 Ton x 1"
Category: Presses
Subcategory: O.B.I. Flywheel Type Single Crank
Condition: Used

45 Ton x 4" Used Minster OBI Punch Press (Heavy Duty- Great Brand), Mdl. 5, Air Blow Gun, Clutch Pressure Switch, Dual Palm Button Control, Air Clutch & Air Brake, Emergency Stop, Stroke Indicator, Auto Lubrication System, #A4445

Stock No: A4445
Manufacturer: Minster
Capacity: 45 Ton x 4"
Category: Presses
Subcategory: O.B.I. Flywheel Type Single Crank
Condition: Used

32 Ton x 2.5" Used Federal High Speed OBI Stamping Press, Mdl. 32, Air Clutch and Brake, Variable Speed Drive, #A4703

Stock No: A4703
Manufacturer: Federal
Capacity: 32 Ton x 2.5"
Category: Presses
Subcategory: O.B.I. Back Geared Single Crank
Condition: Used

20 Ton Used Airam Air Cut- Off Press, Mdl. #20, Air Tank, Lite Touch Infrared Dual Hand Controls, Stand, #8493

Stock No: 8493
Manufacturer: Airam
Capacity: 20 Ton
Category: Presses
Subcategory: Air
Condition: Used

60 Ton x 4" Used Minster OBI Punch Press, Mdl. No. #6, Pedestal Mounted Palm Buttons, Vari-Speed Drive, Air Clutch & Brake, Stroke Counter, Tie Rods For Extra Strength, Hour Meter, Bijur Automatic Lubrication, #A4768

Stock No: A4768
Manufacturer: Minster
Capacity: 60 Ton x 4"
Category: Presses
Subcategory: O.B.I. Flywheel Type Single Crank
Condition: Used

25 Ton x 3/4" Used Bliss High Speed Punch Press, Mdl. , Shut Height Indicator, Bliss 46HL Clutch & Motor Control, Bliss AL69H Slanted Top, Recirculating Oil System, #A4755

Stock No: A4755
Manufacturer: Bliss
Capacity: 25 Ton x 3/4"
Category: Presses
Subcategory: Straight Side (Double Crank)
Condition: Used

75 Ton x 5" Used Minster OBS Punch Press, Mdl. 70-4-1/2, Bolster Plate with Ball Transfers, Dual Palm Control Mounted on Ram, Bijur Lubrication System, Work Lights, Operator Push Button Control on Ram, Air Clutch & Brake, Minster Clutch Control, #A4753

Stock No: A4753
Manufacturer: Minster
Capacity: 75 Ton x 5"
Category: Presses
Subcategory: O.B.I. Back Geared Single Crank
Condition: Used

60 Ton x 5" Used Minster OBI Double Geared Head Punch Press, Mdl. #6, Dual Palm Control with E-Stop, Helm Loadgard Tonnage Monitor, Inch/Single/Continuous Modes, Hilma Clamping System for Bed and Slide, Air & Clutch Brake, Stroke Counter, Forward & Reverse Motor Control, #A4752

Stock No: A4752
Manufacturer: Minster
Capacity: 60 Ton x 5"
Category: Presses
Subcategory: O.B.I. Back Geared Single Crank
Condition: Used

500 Ton Used Bliss Straight Side Stamping Press (BIG HEAVY DUTY PUNCH PRESS), Mdl. HP2-500-84X48, Bliss Controls, Data Instruments SmartPAK Wintriss Press Automation Control, AutoSetPAC, Wintriss Load Analyzer, (2) Programmable Cam Outputs, DiPRO and DSI2 Sensor Interfaces, Air Pressure Die Balance, COE "Servo Master Series" Model CPRF-S424 24" Feed with Digital Control, #C5079

Stock No: C5079
Manufacturer: Bliss
Capacity: 500 Ton x 6"
Category: Presses
Subcategory: Straight Side (Double Crank)
Condition: Used

3 Ton Used Greenerd Lever Type Arbor Press, Mdl. #3, Stand, Table Plate, Punch Slug Receptor, #A4892

Stock No: A4892
Manufacturer: Greenerd
Capacity: 3 Ton
Category: Presses
Subcategory: Arbor
Condition: Used

500 Ton x 16" Used Danly Straight Side Press, Mdl., #CD5098

Stock No: CD5098
Manufacturer: Danly
Capacity: 500 Ton x 16"
Category: Presses
Subcategory: Straight Side (Double Crank)
Condition: Used

1,800 Ton x 7" Used Crossley Hydraulic Press, Mdl. # 13, #CD5106

Stock No: CD5106
Manufacturer: Crossley
Capacity: 1,800 Ton x 7"
Category: Presses
Subcategory: Hydraulic
Condition: Used

10 Ton Used Hudson Machinery (Guidolin Girotto) Narrow Web Flat-Bed Die Cutting & Kiss Cutting Clicker Press, Mdl. GD 301, #A5018

Stock No: A5018
Manufacturer: Hudson
Capacity: 10 Ton
Category: Presses
Subcategory: Clicker
Condition: Used

20 Ton Used Pedersen Swing Head Hydraulic Clicker Press , Mdl. VILH 282, Out Board Supports, Dual Palm Control, Stroke Counter, #A5016

Stock No: A5016
Manufacturer: Pedersen
Capacity: 20 Ton
Category: Presses
Subcategory: Clicker
Condition: Used

30 Ton x 4" Used Energo 4 Column Hydraulic Press (BRAND NEW NEVER USED) Great for Pressing Metals or Coins and Jewelry Making For Blanking, Clamping, Coining, Embossing, Drawing, Forming, Injection Molding, Powder Compacting, Forging, Trimming and More. For Gold, Silver and Other Rare Metals, Mdl. G.T.V 30, 4" Touch Screen Programmable Controller, Light Curtain, T-Slotted Table, NEW REPLACEMENT COST OVER $30,000, #A5008

Stock No: A5008
Manufacturer: Energo
Capacity: 30 Ton x 4"
Category: Presses
Subcategory: Hydraulic
Condition: Used

12 Ton x 3" Used RMT Pneumatic Toggle Press (Punching, Blanking, Die Cutting, Marking, Coining, Swaging, Assembly) Great for Precious Metals Like Gold and Silver, Mdl. 12C, Stand, New Replacement Cost $12,450.00, #A5010

Stock No: A5010
Manufacturer: RMT
Capacity: 12 Ton x 3"
Category: Presses, Jewelry Making Machinery
Subcategory: Toggle, Double Action, Air
Condition: Used

8 Ton x 3" Used RMT Pneumatic Toggle Press (Punching, Blanking, Die Cutting, Marking, Coining, Swaging, Assembly) Great for Precious Metals Like Gold and Silver, Mdl. 6C, Stand, Foot Pedal, New Replacement Cost Over $12,000, #A5011

Stock No: A5011
Manufacturer: RMT
Capacity: 8 Ton x 3"
Category: Presses, Jewelry Making Machinery
Subcategory: Toggle, Double Action, Air
Condition: Used

200 Ton Used Ferrara 200 Ton Press For Blanking, Clamping, Coining, Embossing, Drawing, Forming, Injection Molding, Powder Compacting, Forging, Trimming and More. For Gold, Silver and Other Rare Metals, Mdl. HY200T-S-US 10-0200, #A5013

Stock No: A5013
Manufacturer: N. Ferrara
Capacity: 200 Ton
Category: Presses, Jewelry Making Machinery
Subcategory: Hydraulic
Condition: Used

100 Ton x 5" Used Schuler Beuhler (Excellent Shape) C-Frame Straight Side Stamping Press "BLISS PRESS PARENT CO.", Mdl. , Air Clutch, Schuler Digital Controller, Maha Parts Feeder, FAG Bowl Feeder, Sander Automation GmbH, Year (2012) #A5080

Stock No: A5080
Manufacturer: Schuler Beuhler
Capacity: 100 Ton x 5"
Category: Presses
Subcategory: O.B.I. Back Geared Single Crank, O.B.I. Flywheel Type Single Crank, Straight Side (Single Crank), Gap Frame, (Single Crank)
Condition: Used

220 Ton x 9" Used Aida Mechanical Two Point C-Frame Press, Mdl. NC2-200 (2), Air Clutch & Brake, Light Curtains, Auto Lube System, T-Slotted Ram & Bolster Plate, Motorized Ram Adjustment, Pedestal Control, Palm Button Control, Located in Fort Worth, Texas, #CD5115

Stock No: CD5115
Manufacturer: AIDA
Capacity: 220 Ton x 9"
Category: Presses
Subcategory: Gap Frame, (Double Crank)
Condition: Used

88 Ton x 6" Used Aida Mechanical Single Point C-Frame Press, Mdl. NC1-80(2), Air Clutch & Brake, Air Counter Balance Cylinders, Dual Palm Control, T-Slotted Ram & Bolster, Power Ram Adjustment, Shut Height Indicator, Hydraulic Overload Protection, Located in Fort Worth, Texas, #CD5116

Stock No: CD5116
Manufacturer: AIDA
Capacity: 88 Ton x 6"
Category: Presses
Subcategory: Gap Frame, (Single Crank)
Condition: Used

110 Ton x 8" Used Bliss OBI Punch Press, Mdl. C-110, Shut Height Indicator, Flanged Ram Sub-Plate, Air Counter Balances, Bolster Plate, T-Slotted Ram Die Set, T-Slotted Bolster Die Set, Central Metered Lubrication, Dayton Rogers Air Cushion, Pedestal Mounted Dual Palm Buttons & E-Stop, Press Shock Absorbing Mounts, #CD5117

Stock No: CD5117
Manufacturer: Bliss
Capacity: 110 Ton x 8"
Category: Presses
Subcategory: O.B.I. Flywheel Type Single Crank
Condition: Used

60 Ton x 4" Used Komatsu OBS C-Frame Punch Press, Mdl. 60-LVS-3, Komatsu Controls, Air Clutch & Brake, Feed System, Light Curtains, Year (1999) #CD5118

Stock No: CD5118
Manufacturer: KOMATSU
Capacity: 60 Ton x 4"
Category: Presses
Subcategory: Gap Frame, (Single Crank)
Condition: Used

750 Ton x 18" Used Pacific Hydraulic OBL Open Back Long Straight Side Hydraulic Press (Like New), Mdl. 750-12 OBL, Autocycle, Flush Floor, Safety Area Scanner, Continuous Run Mode, Safety Slide Blocks, 48" x 144" Slide Area, Year (2011) #C5109

Stock No: C5109
Manufacturer: Pacific
Capacity: 750 Ton x 18"
Category: Presses
Subcategory: Hydraulic, Straight Side (Double Crank)
Condition: Used

10 Ton Used Custom Made Hydraulic Stamping Press, Mdl. , Cognex Inspection Camera, Allen Bradley Panel View Plus 1000 CNC Control, P/A Industries SRF5-SP Feeders, Robot Arms, Laser Marker, #A5230

Stock No: A5230
Manufacturer: Custom Made
Capacity: 10 Ton
Category: Presses
Subcategory: Hydraulic
Condition: Used

10 Ton Used Custom Made Hydraulic Stamping Press, Mdl. , Cognex Inspection Camera, Allen Bradley Panel View Plus 1000 CNC Control, P/A Industries SRF5-SP Feeders, Robot Arms, Laser Marker, #A5231

Stock No: A5231
Manufacturer: Custom Made
Capacity: 10 Ton
Category: Presses
Subcategory: Hydraulic
Condition: Used

2,000 Tons Used Clearing Double or Single Acting Hydraulic Press, Mdl. DH-1500-500-108, 108" x 78" Bed Size, Pump Capacity (Two) 71.4 G.P.M. @3,000 PSI, Main Motors (TWO) 100 H.P. (T.E.F.C.)- 900 RPM, Die Cushion, Upgraded PLC Control, #CD5144

Stock No: CD5144
Manufacturer: Clearing
Capacity: 2,000 Tons
Category: Presses
Subcategory: Hydraulic
Condition: Used

100 Ton x 6" Used Aida Gap Frame Hydraulic Punch Press, Mdl. PP-XG0-100SU, #A5325

Stock No: A5325
Manufacturer: AIDA
Capacity: 100 Ton x 6"
Category: Presses
Subcategory: Gap Frame, (Single Crank)
Condition: Used

200 Ton Used Aida Gap Frame Hydraulic Punch Press (Heavy Duty), Mdl. 20, 33" x 69.5" Bolster Plate, DIPRO 1500 WINTRISS DIE PROTECTION, #A5326

Stock No: A5326
Manufacturer: AIDA
Capacity: 200 Ton
Category: Presses
Subcategory: Hydraulic, Gap Frame, (Single Crank)
Condition: Used

60 Ton x 6" Used Minster OBI Geared Stamping Press (EXCELLENT CONDITION. MINSTER REMANUFACTURED 2005), Mdl. 6, Protech Eagle Eye Light Curtain, Bijur One Shot Lube, Die Cushion, Durant Stroke Counter, Remanufactured by Minster in 2005, Air Clutch & Brake, Front Dual Palm Controls, Variable Speed Drive, Auxillary Air Tank, Minster Ross Valve, #A5343

Stock No: A5343
Manufacturer: Minster
Capacity: 60 Ton x 6"
Category: Presses
Subcategory: O.B.I. Back Geared Single Crank
Condition: Used

6 Ton Used Haeger Insertion Press With Tooling, Mdl. 618, Foot Pedal, Tooling, #A5352

Stock No: A5352
Manufacturer: HAEGER
Capacity: 6 Ton
Category: Presses
Subcategory: Hardware Inserting
Condition: Used


9310 Garvey ave., South El Monte, California 91733
Phone: 626-444-0311 � Fax: 626-443-9588